KECMTSheet metal machines since 2008

Machines

Eight machine families, thirty-four configurations. We do not organise them by tonnage — 40T, 63T, 100T down a page — because tonnage is rarely the first thing that breaks a project. We organise by what physically constrains you: the power at the wall, the space through the door, the shape of the part, its length, and where bending sits in the wider process. Start from the constraint, not the catalogue.

The line as it runs in the workshop — fiber laser cutting, press brake bending and shearing, specified together so the cell is planned end to end.

Why not a tonnage table?

Most suppliers lead with a tonnage table. It tells you how hard the machine pushes; it does not tell you whether it fits your building, clears your doorway, or bends your part without fouling the frame. The number that actually stops a project is usually power, clearance, geometry or length — tonnage is just one axis, and often not the binding one. So the range below is grouped by machine family, and inside each family we say what the configuration is actually for.

Press brakes

Fourteen configurations, from 30-ton bench machines to 6,000 kN robotic cells — organised by the constraint that binds you, not by tonnage.

CNC hydraulic press brake

The core range of NC, CNC and electro-hydraulic servo builds in conventional frames.

Torsion bar press brake

Mechanically synchronised WC67K range, 30-400 ton, bending lengths 1.6-6 m, TP10S control.

Electro-hydraulic press brake

Closed-loop cylinder sync with servo valves and grating rulers, CNC crowning, WE67K 30-400 ton.

Electric-hydraulic CNC press brake

Servo-driven main pump, Delem DA53T 4+1 axis control, 60% lower energy consumption.

Hybrid press brake

Electric servo motors driving the hydraulics — up to 85% less energy, ±0.01 mm repeatability.

Robotic press brake cell

6-axis robot with 20 kg payload and 0.05 mm repeatability, brakes from 100 to 6,000 kN.

Automatic press brake

Cobotic arm bending cells with Delem DA66T offline simulation and 24/7 operation.

Hydraulic plate press brake

40-1,000 ton plate bending, beds to 12,000 mm on large projects, DA-66T control.

Small tonnage press brake

Compact frames for small shops, job shops and limited workshop space.

Deep throat press brake

Deep throat and wide daylight for box work, enclosures and large flanges.

Tandem press brake

Synchronised pairs for long parts beyond a single bed.

Cable tray making line

WC67K brakes 63-125 ton with front supporters, plus robotic units that finish a tray without die changes.

Alternatives to premium brands

KECMT vs TRUMPF, Amada, Bystronic, LVD, Durma and more — what compares, and what does not.

DIY press brake kits & accessories

Build your own: servo control system with panel and cabinet, backgauge with servo motors and guides, clamps, punches and dies, hydraulic system and motor.

Shearing machines

The cut that feeds the bend. Swing beam and guillotine builds, plus how to size a shear against your brake.

Which shear do you need?

Swing beam vs guillotine, blade clearance and why it distorts cuts, sizing the shear against the brake.

Hydraulic swing shearing machine

Swing beam shears, 4-25 ton, cutting lengths 2.5-6 m. 29 standard models, E21S control.

Hydraulic guillotine shearing machine

Guillotine shears, 4-30 ton, cutting lengths 1.6-6 m, electric shear angle adjustment. 45 standard models.

Laser cutting

Flat sheet, tube, or both processes on one bed — plus robotic laser cladding for repair and coating work.

Fiber laser cutting machine

Sheet metal lasers from 1500W to 12000W, cutting areas to 6 x 1.5 m, fully enclosed or open platform.

Laser tube cutting machine

Round, square, oval and rectangular tube from 20 mm to 200 mm, full-stroke chuck with no claw changes.

Sheet and tube laser cutting machine

Both processes on one bed — flat sheet and tube, same control, same software.

Laser cladding machine

MOBIMR-6000 mobile robotic cladding cell — 6000W Raycus laser, 6-axis Estun robot, ±0.05 mm repeatability.

Plate rollers & section benders

Four-roller plate rollers to CNC spec, and hydraulic roll benders for angle steel, channel, tube and bar.

CNC 4-roller plate roller

HC4R range, 24 models, pre-bending 6-80 mm, 42CrMo forged rollers, Siemens PLC/CNC.

Hydraulic roller bender

W24S angle and section benders, section modulus 6 to 500, all three rollers driven.

Hydraulic presses

C-frame shop presses from 10 to 250 ton for press fitting, coining, straightening and forming.

Hydraulic press machine

Multifunctional C-frame presses, button or PLC control, cartridge valve hydraulic block.

Turret punching

Servo-driven punch presses with 32 turret stations for nibbling, forming, beading and lettering.

CNC turret punching machine

250 kN direct-drive servo press, O-frame, 5-axis control (X, Y, T, C, A), ±0.10 mm accuracy.

Combination machines

Two or three processes in one footprint, for shops where floor space is the binding constraint.

Brake, shear & roll 3-in-1 machine

Bending, cutting and rolling in one unit — 10-16 gauge steel, bend angles to 135°.

Brake and shear 2-in-1 machine

Bending and slitting in one integrated system, working widths to 3200 mm. ALB-2600 in stock.

Portable & manual machines

Bench and floor machines small shops actually run — brakes, shears, wheels, benders and notchers, no power required.

Portable fab machines

The full bench and floor range — where to start when the shop is small and the budget is tighter.

Pan and box brake

305 mm bench finger brakes to 1200 mm floor models, pedal manual brakes and segmented folders.

English wheel

Incremental wheel machines for compound curves — F1.2x560 standard and heavy-duty frames.

Manual benders

Cleat benders, pipe benders, manual sheet rollers and small bench brakes — no power required.

Manual shears

Hand shears, foot pedal shearers and manual guillotines with tungsten carbide blades at 62-64 HRC.

Metal forming tools

Planishing hammers, rotary beaders and shop press brake attachments that turn a press into a bender.

Tube notcher & shrinker-stretcher

Hole saw, end mill and angle notchers 0-60°, plus shrinker-stretchers for rolled edges.

Distributors

We are expanding the global footprint and looking for distribution partners — exclusive regional rights, local inventory, marketing support and technical training included.

Become a KECMT distributor

Exclusive regional rights, local inventory support, marketing material, technical training and 24/7 service backing for qualified partners.

Retrofit & upgrades

For machines you already own: new CNC control, new backgauge, rewired cabinet, and the tooling upgrades that make an old brake change dies in seconds — multi-V to 2-V dies, fast-change clamps, American to European clamping, die risers and compensation.

Press brake retrofit & upgrades

NC or manual to CNC control conversion, backgauge and electrical retrofits, and tooling system upgrades for the machine in your shop.

Not sure where to start?

Describe your part and name your tightest constraint — power at the wall, clearance through the door, a geometry that fouls the frame, a length past the bed, or the cut that feeds the bend. We will point you to the one configuration worth reading, or tell you the project needs something we should quote as custom.

Tell us what you need to bend

Send a drawing, a photo, or just the material and thickness. We come back with a machine configuration and a quote.

Request a quote roger@kecmt.com WhatsApp +86 183 5532 1931